Automation
PowerWand™ Motorization
•PowerWand™ Rechargeable option is an easy, cord free motorized operation for the budget savvy homeowner.
PowerWand™ Rechargeable Shades Operation
• Press the up or down button on the pendant to raise or lower the shading to your desired position. No programming is required with PowerWand™ as upper and lower limits are set at the factory. If desired, upper and lower limits can be adjusted in the field.
• Please refer to the installation instructions for instructions on resetting the upper and lower limits and setting a favorites position can be programmed on-site.
PowerWand™ Appearance
• The PowerWand™ Rechargeable wand and pendant is attached to the head rail and requires no additional mounting.
• The wand and pendant hangs down the front of the shades from the head rail.
• Pendant is 2-1/2” long.
• The pendant does not need to be mounted to the wall to operate the shade
PowerWand™ Options
• Wand is available in Black or White (there is no default)
• Wand is available in 1 foot increments from 1 to 5 feet (there is no default)
• Wand is available on either the right or left side of the shade (there is no default)
PowerWand™ Battery Life
• The battery life will vary based on the type of window covering selected, the size and weight of the window covering and the number of times you operate the blind on a daily basis.
Battery Charger
• 8.4 Volt charger requires a standard power outlet to recharge the battery. The charger must be specified when ordering the PowerWand motorization option. The charger plugs into the charger port on the side of the pendant. The charger is black and comes with a 156” wire. The dimensions are 1” wide x 2-1/2” length x 1-3⁄4” deep. Sold separately.
Simplicity Rechargeable Motorization
• The Rechargeable Simplicity motor program features an integrated rechargeable lithium ion battery in the motor casing and is fully concealed by the inner tube.
• Rechargeable battery is included with the motor. The average battery charge will last 6-12 months based on an average sized shade raised and lowered once per day. The life of the battery charge will vary based on the type of window covering selected, the size and weight of the window covering and the number of times the shade is operated on a daily basis. The battery can be recharged up to 500 times. It takes approximately 5 hours to recharge the motor when fully depleted.
Battery Charger
• An 8.4 Volt charger requires a standard power outlet to recharge the battery. The charger must be specified when ordering Simplicity Rechargeable Motorized shade option. The charger plugs into the charging port of the motor. The charger is black and comes with a 156” wire. The dimensions are 1” wide x 2-1/2” length x 1-3/4″ deep. Sold separately.
Solar Panel Recharge Option
Plugs in to any Simplicity Rechargeable motorized shading (does not work with PowerWand™). Provides constant trickle charge to 7.4v Li-ION Rechargeable battery packs. Does not require direct sunlight, but performs best in regular direct sunlight applications. Will prolong the life of the charge of the 7.4v rechargeable battery packs, and in some applications will maintain charge indefinitely.
• Life of charge is subject to application variables such as, size and weight of shade, frequency of use, amount of direct sunlight exposure, etc.
5 Channel Remote
• The remote can operate up to five shadings simultaneously, individually or in groups. Remotes and holders are available in white or black. The remote comes with a holder which can be mounted to a wall for easy storage. The range of the remote is approximately 80 feet.
Please Note:
• Not all motors run at the same rate of speed.
• Simplicity motors have a “Favorites” position setting. To set a “Favorites” position, follow instructions provided in the installation instructions.
RemoteLift™ Motorization
• With RemoteLift™ motorized shades, enjoy a better quality of life and have more time to enjoy life’s daily pleasures. At the touch of a button, window coverings can be instantly adjusted to changing activities or the varying sun conditions.
An ideal solution is to manage glare with a RemoteLift hand-held remote control. At the simple touch of a button, shades will open or close to adjust to the changing sunlight in a room.
RemoteLift Radio Frequency (RF) motorized shades provide ultra- quiet operation. The system can operate shades from virtually anywhere in the house without direct line of sight. Similar to how a garage door opener operates, radio signals travel through walls and make it possible to control multiple coverings throughout the home alone or as a group. The RF system is also available in a 5 or 16 channel version. The multi-channel RF system allows for independent control of individual shades and/or group control.
RemoteLift motorization systems provide many benefits, such as improving energy efficiency, providing easily controllable privacy and also enhancing home security
The RemoteLift RF timer allows users to program specific times of the day to automatically adjust shades in different areas of the house, protecting interiors from the fading effects of direct sunlight. This feature provides added security to an unoccupied home by creating a lived in look even while homeowners are away on vacation. The battery powered RemoteLift RF wireless wall switch allows shades to be controlled when entering or exiting a room, just like the lights. The switch may be seamlessly installed without wiring next to any light switch or stand alone, and is never misplaced. This one touch privacy helps create the ideal environment whether preparing for a bath, relaxing in bed or enjoying time with the family at home.
The Smoove® 1 RTS surface mounted wall switch avoids cutting into drywall. This single channel, battery-operated solution is easy to install, and doesn’t require an electrician. It’s an intuitive, surface mount control.
The myLink™ RTS Smartphone and Tablet Interface is a WiFi to Radio Technology Somfy® (RTS) bridge that can control up to 5 channels of RTS motorized products using the Somfy myLink apps for iOS and Android devices. Through the app, users can send immediate RTS commands, create scenes (a group of motorized products working together) and schedules (timed events). Users may access their myLinks from anywhere with the app’s remote access feature. Though the myLink is a single-zone controller, multiple myLinks can be joined within the same system for multi-zone control.
To view RemoteLift Motorization features & options, click here Remotelift mortorizationRollerShades
Measuring & Maintenance Information
Accurate measurements are essential to ordering Concept Dual Shadings. It is important to utilize a metal tape measure and a level. When taking measurements please round all measurements to the nearest 1/8 inch. Shades can be installed inside window frame or positioned outside of window frame.
Measuring for Inside Installation (IB)
For shades to be installed inside the window frame, it is important to check for obstructions such as alarm systems, window cranks, etc., that may interfere with the shade operation.
Width: Measure the exact distance between the inside of the window frame on one side to the inside frame of the other side. Measure in three locations and take the narrowest of these measurements to the nearest 1/8″. Measure the diagonal of the window to confirm that the window is square. If the window is out of square by more than 1/4″, you may wish to consider an outside mount to ensure the shade rolls straight when installed. Factory will make necessary deductions if ordered as a tight measurement.
Length: Measure from the top inside surface of the window frame to the top of the window sill. Measure the length down to the point where the shade is to reach. Factory makes shade to length dimension ordered with the tolerances of plus or minus 1/8″.
Please Note: Fabric width will be 1 1/8″ to 1 1/4″ less than hardware
Measuring for Outside Installation (OB)
Before taking any outside measurements, determine the area the shade is to cover. It is important to check for obstructions such as alarm systems, window cranks, etc. that may interfere with the shade operation.
Width: Lightly mark with a pencil the desired bracket locations (outer ends of shades). Measure the width at the level where the brackets will be installed. Be sure the width dimension includes a minimum of 2″ overlap at each side of window to ensure privacy.
Length: Measure the distance from the desired bracket position to the point where the bottom of the shade will extend. Be sure to allow a minimum of 2″ overlap at both top and bottom of window to ensure privacy. Factory makes shades to length dimension ordered with the tolerance of plus or minus 1/8″.
Care and Maintenance
Dusting: Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.
Inside Mount:
Width – Measure the smallest inside width. Measure the diagonal to confirm that the window is square.
Length – Measure the length of the window sill from the top of the opening to the bottom of the sill.
